|
|
|
934135
|
10 AMP. Momentary-to-Toggle (Bi-Stable)
Switching Converter
The
LATCH
module is an auxiliary device designed to allow
easy and reliable arming/disarming momentary,
two wire start stop circuit, or with hand-held
wireless remote controls. It may be looked upon
as an easy-to-use, cost-effective
"momentary-to-toggle (bi-stable)" switching
converter.
Momentary closure of the terminals 2 and 5 will
latch the relay.
A
subsequent momentary closure of the
contacts will unlatch the relay.
Reset
the Toggle relay by removing power from terminal
2 or 10
Note:
The LATCH module is also suitable for similar
performance of other remote control operations.
The
relay provides N.O. and N.C. contacts, and can
therefore be used with a wide variety of control
applications
Specifications and Features
-
Output
LATCH relay provides N.O. and N.C.
contact
-
Operating power - 12 , 24 VAC/DC
and 120, 220 VAC
-
Current drain - less than 10mA
(unlatched), 90 mA (latched).
-
Relay switching capability:
-
10 Amp. 220 V, 1.0 HP- 277 V,
0.5 HP - 120V
-
8
Amp. Ballast
-
8 Amp. Tungsten
-
Auto reset by power removal
-
17.5 mm DIN-rail housing
-
Environmental
Storage Temperature: -23°C to 70°C,
Operating Temperature: -20°C to 60°C
|
 |
LED
indication time status and power supply
A1 & A2
Operating Voltage:
12 to 240 VAC or VDC
Start Switch Closure Time: 20 milliseconds minimum
Power Consumption:
0.7 to 3VA. AC, 0.5 to 1.7 W. DC
|
|
|
|
