|
The 662
Electronic
control relay for detecting a rising water level, it
has a medium power relay inside its waterproof
enclosure, which operated by water reaching the trip
level, and can be used to control alarms or other
equipment
The
relay is energized when water is present. This sequence is fail-safe, allowing
the 662 to be used as a water spillage alarm switch,
or turn off a a valve or stop an air conditioning unit
before the water overflows its container.
- Small enough
to be used in restricted spaces
-
Size: 3.2 x 2 x 1.5 inch
(82 x 50 x 38 mm)
- Water
detection with accurate switching level
- All components
encapsulated against moisture ingress
- Switch-off height
0.43" (1.1 cm)
- Switch-on reset
0.31" (0.8 cm)
-
Switching capability 5 amps at 125 VAC
- Power supply
11 to 27 VAC or VDC 1.Watt
(80 mW standby)
- 12 or 24V operation
 
|
